Volkswagen CJDA Workshop Manual page 487

– Unscrew securing bolt of starter -arrow-.
– Remove starter downwards.
1.4.2 Installing
Install in reverse order. In the process, note the following:
– Tighten threaded connections to specified torque
⇒ P age
471.
– With ignition switched off, connect battery.
1.4.3 Specified torques
Threaded connection
Starter to power unit
Earth wire to securing
bolt of starter
Line retainer to securing
bolt for starter
Positive wire to solenoid
switch of starter
2 Alternator -C-
WARNING
Adhere to the general safety regulations and the notes on
repair work on the engine!
Observe rules for cleanliness
Assembly overview - alternator -C-
Tightening sequence and specified torque, ancillary bracket to
⇒ P age
cylinder block 144.
Checking alternator -C- and voltage regulator -C1-
Removing and installing alternator -C-
Removing and installing voltage regulator -C1-
Removing and installing poly V-belt pulley
Checking operation of freewheel clutch
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
Specified torque
M10 40 Nm
M12 60 Nm
M8 15 Nm
M8 15 Nm
M8 15 Nm
⇒ P age 1
⇒ P age
354.
⇒ P age
472.
⇒ P age
475.
⇒ P age
⇒ P age
⇒ P age
485.
Industriemotoren - Industrial Engines 2009 ▶
⇒ P age
474.
477.
480.
3
471
2 Alternator -C-