Removing and installing oil filter bracket together with oil cooler
⇒ P age
262.
Checking oil pressure and oil pressure switch -F1-
Note
Observe general notes on the lubrication system.
3.1.1 Assembly overview - oil filter bracket and oil cooler
1 - Gasket
q Renew
1
2 - 15 Nm +
/
turn (90°)
4
further
q Renew
q First fit upper left
and lower right bolts
and then tighten all
four bolts diagonal-
ly.
3 - Oil filter bracket
q Removing and in-
⇒ P age 262
stalling
4 - Seal
q Renew
5 - Connecting piece,
30 Nm
6 - Oil supply line, 22 Nm
q To turbocharger.
7 - Oil pressure switch
-F1-, 22 Nm
q 0.7 bar switch:
brown.
q If seal is leaking, nip
open and renew.
q Checking
⇒ P age
264, check-
ing oil pressure and
oil pressure switch
8 - Cap, 25 Nm
q Loosen and tighten
with socket AF 36 mm -T10125-.
9 - O-ring
q Renew
10 - Oil filter element
q Observe change intervals.
q Ensure "Top" is uppermost when fitting
11 - Seal
q Renew
q Lubricate before installing.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ P age 264
3 Oil filter bracket, oil cooler and oil pressure switch
Industriemotoren - Industrial Engines 2009 ▶
3
261