Volkswagen CJDA Workshop Manual page 341

16 - Retainer
q For electrical cables.
17 - Bolt
q 15 Nm
18 - Heat shield
19 - Gasket
q Renew
20 - Nut
q Renew
q 24 Nm
21 - Exhaust gas temperature sender 1 -G235-
q Exhaust gas temperature sender ahead of turbocharger
q 45 Nm
q Lubricate thread of sender using high-temperature paste G 052 112 A3
q Note installation position
⇒ P age 347
q Check
22 - Bolt
q 20 Nm
23 - Support
q For turbocharger
q Before installing oil supply line, ensure that it is not blocked.
q Before installing, fill turbocharger with engine oil through oil supply line connection.
24 - Bolt
q 9 Nm
25 - O-rings
q Various diameters.
q Renew
26 - Banjo bolt
q 60 Nm
q Renew complete with O-rings.
27 - Oil seals
q Renew
28 - Banjo bolt
q 30 Nm
q Renew complete with O-rings.
29 - O-rings
q Renew
30 - Nut
q 24 Nm
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ F ig. on page 323
Industriemotoren - Industrial Engines 2009 ▶
1 Charge air system with turbocharger
3
325