Pressing Out Sealing Flange With Sender Wheel - Volkswagen CJDA Workshop Manual

E - Checking installation position of sender wheel on crankshaft
⇒ P age
176.
F - Re-pressing sender wheel
2.5.1 Pressing out sealing flange with sender
wheel
Note
For the sake of clarity, the work is performed with the engine re-
moved.
⇒ P age
– Remove flywheel
flanges and flywheel.
– Remove intermediate plate.
– Set engine to TDC for no. 1 cylinder
and installing toothed belt.
⇒ P age
– Drain engine oil
Note
Observe environmental regulations for disposal.
⇒ P age
– Remove sump
– Remove engine speed sender -G28- -arrow- using a com-
mercially available ball-ended hex key socket.
– Unscrew sealing flange securing bolts.
Note
Sealing flange and sender wheel are pressed off the crankshaft
together using three M6 x 35 mm bolts.
– Screw three M6 x 35 mm bolts into threaded holes -arrows-
of sealing flange.
– Screw bolts alternately (max.
into sealing flange and press sealing flange together with
sender wheel off crankshaft.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ P age
177.
167, Assembly overview - sealing
⇒ P age
210, Removing
245.
244.
1
/ turn (180 °) for each bolt)
2
2 Removing and installing sealing flange and flywheel
Industriemotoren - Industrial Engines 2009 ▶
3
171