Volkswagen CJDA Workshop Manual page 472

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
WARNING
During a regeneration the diesel particulate filter be-
comes very hot - risk of fire.
◆ Place the vehicle/machine in such a way that the die-
sel particulate filter does not get in contact with dry
grass or any other flammable materials.
◆ Never use any additional undercoating or anti-corro-
sion material for exhaust pipes, heat shields or the
diesel particulate filter. Such substances may ignite
when the engine becomes hot.
◆ In hazardous situations it may be necessary to cancel
the regeneration of the diesel particulate filter. Can-
celling regeneration of diesel particulate filter
⇒ P age
457.
– The vehicle diagnostic tester must be connected.
– Select diagnosis function "015-Access permissions". The en-
gine must run at idling speed.
– If available, select "015.2 Security Access (automatic)".
– Enter following access code:
● Access code: 40809
– Confirm access code.
– Press button 3 times to go back to diagnosis function
←
menu.
Select diagnosis function "014-Long adaptation".
– Select "Channel number 13".
– Klick on .
Keyboard
– Enter adaptation value "0001".
– Press button.
→
– Confirm value with
Confirm
– Start regeneration by pressing
The engine speed increases automatically to 1500 rpm. If a
coolant temperature of at least 80°C and an exhaust gas tem-
perature ahead of the diesel particulate filter of at least 161°C
has been reached, the regeneration starts automatically.
– Press button 2 times to go back to diagnosis function
←
menu.
– Select diagnosis function "011-Read measured value block".
– Select "Display group 108".
Indicated on display:
456 Repair Group 26 - Exhaust system
⇒ P age 23
button.
button.
Save
Display group 108
110 ml 30.0 g 30.0 g