Volkswagen CJDA Workshop Manual page 229

– Remove lower toothed belt guard. To do this, unscrew bolts
-arrows-.
– Turn engine to TDC position, and pin crankshaft pulley using
crankshaft stop -T10050-. To do this, push crankshaft stop
into toothed belt pulley splines from face end. The toothed
segment of the camshaft must be at the "12 o'clock position".
Note
The markings on the crankshaft pulley -2- and the crankshaft
stop -T10050- -1- must align. At the same time, the pin of the
crankshaft stop -T10050- must engage in the drilling in the seal-
ing flange.
– Mark direction of rotation of toothed belt.
– Loosen securing bolts -1- for camshaft toothed belt pulley.
– If fitted, loosen securing bolt of coolant pipe and then secur-
ing bolts of toothed belt pulley for high-pressure pump -1-.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
Industriemotoren - Industrial Engines 2009 ▶
3
1 Cylinder head 213