Volkswagen CJDA Workshop Manual page 480

3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
– Start service regeneration as follows:
– Press button (back) twice.
←
Select diagnosis function "015-Access permissions".
– Enter following access code:
● Access code: 40809
– Confirm access code.
– Press button (back) 3 times to go back to diagnosis func-
←
tion menu.
Select diagnosis function "014-Long adaptation".
– Select "Channel number 13".
– Enter adaptation value "1".
– Confirm value with
Confirm
– Press button (back) 2 times to go back to diagnosis func-
←
tion menu.
– Select diagnosis function "011-Read measured value block".
– Select "Display group 108".
– Increase engine speed to approx. 1700 rpm.
Indicated on display:
Note
During service regeneration the values in the display zones 2
and 3 should decrease.
– Check soot loading in display zones 2 and 3. Specification:
< 5 g.
If specification is attained:
– Press button (back).
←
– Select "Display group 104".
Indicated on display:
– If display zone 2 shows "FF02", the regeneration is still in
progress. Keep engine speed at 1700 rpm and wait.
– If display zone 2 shows "FF01", the regeneration has been
completed. Allow engine to cool down at idling speed.
– Press button (back).
←
– Select "Display group 106".
Indicated on display:
– Check fuel consumption since last regeneration in display
zone 2. Specification: 0.
– Check time elapsed since last regeneration in display zone
4. Specification: 0.
464 Repair Group 26 - Exhaust system
button.
Display group 108
110 ml 30.0 g 30.0 g
Display group 104
FFXX FFXX 0000 0000 km
Display group 106
---- 0-60 0-1500 km
0000 0000
0-36000