Volkswagen CJDA Workshop Manual page 279

– Remove charge air pipe -1- and coolant hose -2-.
– Remove securing bolts of dipstick guide tube.
– Pull guide tube upwards out of crankcase and press it slight-
ly aside.
– Disconnect connector -1- on oil pressure switch -F1- using
assembly tool -T10118-, and unscrew oil pressure switch.
– Remove oil supply line -3- from the oil filter bracket. If neces-
sary, counterhold with an open-ended spanner.
– Place oil drip tray below engine.
– Unscrew securing bolts -arrows- and remove oil filter brack-
et.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
◆ Renew gaskets, seals and O-rings.
◆ Specified torques for oil filter bracket
◆ Filling with coolant
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ P age 261
3 Oil filter bracket, oil cooler and oil pressure switch
Industriemotoren - Industrial Engines 2009 ▶
3
263