Removing And Installing Hall Sender -G40 - Volkswagen CJDA Workshop Manual

11 - Gasket
q Renew
12 - 25 Nm
13 - Lifting eye
14 - Cylinder head gasket
q Renew
⇒ F ig. on page
q Note marking
q After renewing, renew entire coolant.
15 - Hall sender -G40-
q For camshaft position.
⇒ P age 403
q Check
q Removing and installing
16 - 10 Nm
Checking cylinder head for distortion
Special tools and workshop equipment required
◆ Straightedge 500 mm -VAS 6075-
◆ Feeler gauges
Max. permissible distortion: 0.1 mm.
Note
Reworking diesel cylinder heads is not permissible.
Cylinder head gasket identification
◆ Part number = arrow 1
◆ Holes = arrow 2
◆ Production control code = arrow 3 (can be disregarded)
Note
◆ Different thicknesses of cylinder head gasket are fitted de-
pending on the piston projection. When the seal is renewed,
ensure that the designation matches.
◆ Piston projection at TDC must be determined when installing
new pistons or a short engine.
1.2 Removing and installing Hall sender
-G40-
WARNING
Adhere to the general safety regulations and the notes on
repair work on the engine!
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
191.
⇒ P age 191
⇒ P age
213.
⇒ P age 1
Industriemotoren - Industrial Engines 2009 ▶
3
1 Cylinder head 191