Removing And Installing Crankshaft - Volkswagen CJDA Workshop Manual

3 Removing and installing crank-
shaft
Note
◆ The repair work described in this chapter must be carried out
in a Volkswagen dealership only. Go to a Volkswagen deal-
ership.
◆ If these instructions are not adhered to and damage results,
Volkswagen is exempt from any liability and warranty claims.
WARNING
Adhere to the general safety regulations and the notes on
repair work on the engine!
Note
◆ Before carrying out repair work, secure engine on engine
and gearbox support -VAS 6095/1- using universal mounting
-VAS 6095-.
◆ Finding metal shavings or a large quantity of small metal
particles during engine repair could indicate that the crank-
shaft bearings or conrod bearings are damaged. To prevent
this from causing further damage, perform the following re-
pairs:
◆ Thoroughly clean oil channels.
◆ Renew oil spray jets
◆ Renew oil cooler
◆ Renew oil filter element
Assembly overview - crankshaft
Crankshaft dimensions
Pulling needle bearing, if fitted, out of and driving into crank-
⇒ P age
shaft 181.
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
⇒ P age 1
⇒ P age
180.
⇒ P age
180.
Industriemotoren - Industrial Engines 2009 ▶

3 Removing and installing crankshaft

3
179