Pwr-Power; Ral-Remote Access Level - Christie 4K35-RGB Technical Reference

(PRO 0)
Apply custom profile 3 to the projector:
(PRO 3)
PWR–Power
Changes the power state of the product.
Commands
Command Description
PWR? Returns the current power state of the projector.
(Read-only)
PWR <0 | 1> Turns the projector on or off.
PWR+ELEC <0 | 1> Keeps video electronics on in standby, regardless
of laser state. (Saved value)
Examples
Return the power setting for the projector:
(PWR?)
(PWR!000 "Power Off")
Turn off the projector:
(PWR 0)
Turn on the projector:
(PWR 1)
RAL–Remote Access Level
Sets the default remote serial protocol access level for any of the serial ports.
Commands
Command Description
RAL <value> Sets the access level on all Ethernet port.
(Saved value)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
000 = Standby
001 = On
010 = Cooling down
011 = Warming up
0 = Turns the projector off
1 = Turns the projector on
0 = Disables electronics override
(Default)
1 = Enables electronics override
Values
0 = No Access—Disables the port
1 = Login Required—Sets read-only access
until a separate login is performed
49