Serial Port (Prt); Power (Pwr) - Christie Mirage WQ-L User Manual

Serial Port (PRT)

PRT
Preference
CONTROL GROUP:
Description
Gets the current serial port being used, or gets a list of all serial ports available on the device.
Subcode
<No Subcode >
Examples:
(PRT ?) Gets current serial port.
(PRT ?L) Gets list of ports.

Power (PWR)

(PWR) Power
Unsaved
CONTROL GROUP:
Description
Change the power state of the projector.
Possible values:
0 - Power-OFF
1 - Power-ON
10 - Projector is cooling down. (Read-only)
11 - Projector is warming up. (Read-only)
Subcode
<No Subcode >
Examples:
(PWR?) Get projector power status. 
(PWR1) Turn the LEDs and all electrical power On. 
(PWR0) Set the projector to Standby mode.
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Power Down
SUBCLASS:
Description of Use
Get or Set the power state of the projector.
Serial Command Reference
Status
ACCESS LEVEL:
Operator
ACCESS LEVEL:
95