Pwr-Power; Ral-Remote Access Level - Christie Crimson Technical Reference

PWR–Power
Changes the power state of the product.
Commands
Command Description
PWR? Returns the current power state of the projector.
(Read-only)
PWR <0 | 1> Turns the projector on or off.
PWR+ELEC <0 | 1> Keeps video electronics on in standby, regardless
of laser state.
Examples
Return the power setting for the projector:
(PWR?)
(PWR!000 "Power Off")
Turn off the projector:
(PWR 0)
Turn on the projector:
(PWR 1)
RAL–Remote Access Level
Sets the default remote serial protocol access level for any of the serial ports.
Commands
Command Description
RAL < value> Sets the access level on all Ethernet port.
(Saved value)
RAL+PRTA <value> Sets the access level for the RS232 port.
(Saved value)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
000 = Standby
001 = On
010 = Cooling down
011 = Warming up
0 = Turns the projector off
1 = Turns the projector on
0 = Disables electronics override
1 = Enables electronics override
Values
0 = No Access—Disables the port
1 = Login Required—Sets read-only access
until a separate login is performed
2 = Free Access—Executes commands at
the operator level unless a separate login is
performed (Default)
43