Pwr-Power; Ral-Remote Access Level - Christie Boxer 4K Technical Reference

PWR–Power
Changes the power state of the product.
Commands
Command Description
PWR <0 | 1> Turns the projector on or off.
PWR+ELEC <0 | 1> Keeps video electronics on in standby,
regardless of lamp state.
PWR? Returns the current power state of the
projector. (Read-only)
Examples
Return the power setting for the projector:
(PWR?)
Turn on the projector:
(PWR 1)
Turn off the projector:
(PWR 0)
RAL–Remote Access Level
Sets the default remote serial protocol access level for any of the serial ports.
Commands
Command Description
RAL < value> Sets the access level on all Ethernet port.
(Saved value)
RAL+PRTA <value> Sets the access level for the RS232-IN port.
(Saved value)
Examples
Set port to Login Required:
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 = Turns the projector off
1 = Turns the projector on
0 = Disables electronics override
1 = Enables electronics override
000 = Standby
001 = On
010 = Cooling down
011 = Warming up
Values
0 = No Access—Disables the port
1 = Login Required—Sets read-only access
until a separate login is performed
2 = Free Access—Executes commands at
the operator level unless a separate login is
performed (Default)
43