Configuring through WEB
Connection
Introduction
Web is a long-distance management switchboard and is similar
to Telnet. Users can access some Web services through a peer-
to-peer arrangement rather than by going to a central server.
The user should have the access along with password and
management password for the switch, enable Web function.
Purpose
This topic describes the configuration of Web connection.
Steps
For the configuration of Web connection, perform the following
steps.
1. To create user,
2.
3. To configure admin password, use command set user
4. To enable web function and to establish the monitor port,
admin|guest in global configuration mode.
in Table 14.
T
1 4 C
U
A B L E
R E A T E
S E R
Format
create user <name>
admin|guest
Result: This creates user.
To configure user password, use command set user local
<name> login-password <string> in global configuration
mode.
This is shown in Table 15.
T
1 5 U
P
A B L E
S E R
A S S W O R D
Format
set user local
<name> login-
password <string>
Result: This configures user password.
local|radius <name> admin-password <string> in global
configuration mode.
T
1 6 A
P
A B L E
D M I N
A S S W O R D
Format
set user local|radius
<name> admin-
password <string>
Result: This configures admin password.
use command set web enable and set web listen-port
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 Usage and Operation
use command create user <name>
C
O M M A N D
Mode
Function
config
This creates user
C
O M M A N D
Mode
Function
This configures user
config
password
This is shown in Table 16.
Mode
Function
This configures admin
config
password
This is shown
39