Configuring Local Authentication User - Zte ZXR10 5900 Series User Manual

Command
dot1x tx-period <period>
ZXR10(config-nas)#
Command
dot1x supplicant-timeout <period>
ZXR10(config-nas)#
Command
dot1x server-timeout <period>
ZXR10(config-nas)#
Command
dot1x max-requests <count>
ZXR10(config-nas)#
Command
create localuser <user-id>[name
ZXR10(config-nas)#
<user-name>][password <user-password>]
Command
clear localuser < user-id >
ZXR10(config-nas)#
4. To configure dot1x client timeout time, use the following com-
mand.
5. To configure dot1x authentication server timeout time, use the
following command.
6. To configure the maximum times of requests for dot1x client,
use the following command.
Configuring Local Authentication
User
1. To create a local user, use the following command.
2. To delete a local user, use the following command.
3. To bind the user with the port, use the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 12 DOT1X Configuration
Function
This configures the sending
period of dot1x authentication.
Function
This configures dot1x client
timeout time.
Function
This configures dot1x
authentication server timeout
time.
Function
This configures the maximum
times of requests for dot1x
client.
Function
This creates a local user.
Function
This deletes a local user.
133