Rmon Configuration; Rmon Overview; Configuring Rmon - Zte ZXR10 5900 Series User Manual

Command
ZXR10(config-gei_1/x)#
<index>[owner <string>]
Command
rmon alarm <index><variable
ZXR10(config)#
><interval>{delta|absolute} rising-thershold
<value>[<event-index>] falling-threshold
<value>[<event-index>][owner <string>]
Command
ZXR10(config-gei_1/x)#
>[owner <string>][buckets <bucket-number>][interval
<seconds>]
Command
rmon event <index>[log][trap
ZXR10(config)#
<community>][description <string>][owner <string>]

RMON Configuration

RMON Overview

Remote Monitoring (RMON) system is to monitor network terminal
services. A remote detector, the local routing switch system, com-
pletes data collection and processing through the RMON. The rout-
ing switch contains RMON agent software communicating with the
NMS through the SNMP. Information is usually transmitted from
the routing switch to the NMS.

Configuring RMON

1. To enable the interface statistics function (only for Ethernet),
use the following command.
rmon collection statistics
2. To set an alarm and MIB object, use the following command.
3. To enable the history collection function of the interface, use
the following command.
rmon collection history <index
4. To configure an event, use the following command.
5. To display RMON configuration and relevant information, use
the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Network Management Configuration
Function
This enables the interface
statistics function (only for
Ethernet) .
Function
This sets an alarm and MIB
object.
Function
This enables the history
collection function of the
interface.
Function
This configures an event.
119