Multicast-Limit; Show Ip Igmp Snooping; Show Ip Igmp Snooping Group - Zte ZXR10 8900 Series Command Reference Manual

Command Modes
Syntax
Default
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Purpose
Command Modes
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Global Configuration Mode
ip igmp snooping mrouter-slave-to-master
no ip igmp snooping mrouter-slave-to-master
By default, the function is disabled.

multicast-limit

Use this command to configure the limit number of IP multicast.
Global configuration

multicast-limit {1024 | 512 | 256}

no multicast-limit
1024 | 512 | 256
When layer 3 is enabled, the limit number can not be modified.

show ip igmp snooping

Use this command to show configuration information about IGMP
SNOOPING.
All modes except user EXEC

show ip igmp snooping

show ip igmp snooping
group
Use this command to show configuration and operation informa-
tion about a group.
All modes except user EXEC
show ip igmp snooping group <ip-address> vlan <vlan-id>
<ip-address>
<vlan-id>
This command is supported after the platform version 4.6.02.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 IGMP SNOOPING
Limit number of IP multicast, range: 1024,
512 or 256, default: 1024
Group IP address, in the form of dotted
decimal
VLAN ID, range: 1~4094
67