ZXR10 8900 Series Command Manual (FW Volume)
Command Format
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Example
42
Confidential and Proprietary Information of ZTE CORPORATION
host delete [id <number>][name <string>]
Parameter
delete
id
<number>
name
<string>
To delete one host, it is available to delete the host according to
host name, host id or both. However, in case host id and host
name are inconsistent, host name shall apply.
When no parameter is given, the host not quoted by policy is
deleted.
To delete host1, execute the following command:
# host delete name host1
host clean
This command is used to delete all hosts not quoted by policy.
host clean
To clear all unquoted hosts in FW system, execute the following
command:
# host clean
host show
This command is used to view all hosts.
host show
To view hosts, execute the following command:
# host show
range
User can add, modify and delete address range in management of
address range of FW.
Description
This deletes one host.
This specifies ID of the host to be deleted.
This is one number, indicating ID of host.
This specifies the name of host to be deleted.
This is one string, indicating name of the host.