Radius Configuration; Radius Overview; Configuring Radius - Zte ZXR10 5900 Series User Manual

Command
radius accounting-group <group-numb
ZXR10(config)#
er>
Command
radius authentication-group
ZXR10(config)#
<group-number>
ZXR10 Configuration:
ZXR10(config)#interface vlan24
ZXR10(config-if-vlan24)#ip address 192.168.2.2 255.255.255.0
ZXR10(config-if-vlan24)#exit
ZXR10(config)#ntp enable
ZXR10(config)#ntp server 192.168.2.1 version 2

RADIUS Configuration

RADIUS Overview

Remote Authentication Dial In User Service (RADIUS) is a stan-
dard AAA protocol. AAA represents Authorization, Authentication
and Accounting. AAA is used to authenticate the users accessing
the routing switch and prevent illegal users from accessing which
results in enhancing security of the equipment.
ZXR10 5900/5200 supports RADIUS authentication function to au-
thenticate Telnet users accessing the routing switch.
ZXR10 5900/5200 supports multiple RADIUS server groups. Three
authentication servers can be configured in each RADIUS group.
The server timeout time and times of timeout retransmission can
be set for each group. The administrator can configure different
RADIUS groups to select a specific RADIUS server.

Configuring RADIUS

1. To configure RADIUS accounting group, use the following com-
mand.
2. To configure RADIUS authentication group, use the following
command.
3. To configure the parameters of RADIUS, peform the following
steps.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Network Management Configuration
Function
This configures RADIUS
accounting group.
Function
This configures RADIUS
authentication group.
113