Configuring Session; Binding Fw Template For Specific Vlan - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
Example
Example
62 Confidential and Proprietary Information of ZTE CORPORATION
Note:
Masks used in steps 3 and 4 are inverse masks.
To specify source mac address of fw-template 7 to 10.1.1.1
255.255.0.0, execute the following commands:
ZXR10(config)#fw ZXR10(config-fw)#fw-template 7
ZXR10(config-fw-templete-7)#bind slot 8
ZXR10(config-fw -templete-7)#nat sip

Configuring Session

This topic describes how to log in FW with command session.
S Command
tep
1
ZXR10(config)#fw
2
ZXR10(config-fw)#fw-template<
template-id >
3
ZXR10(config-fw-template-1)#sess
ion
To configuring session, execute the following commands:
ZXR10(config)#fw ZXR10(config-fw)#fw-template 7
ZXR10(config-fw-templete-7)#bind slot 8
ZXR10(config-fw -templete-7)#session
Binding FW Template for Specific
VLAN
This topic describes how to bind FW template for specific VLAN.
S
Command
tep
1
ZXR10(config)#fw
10.1.1.1 0.0.255.255
Function
This enters FW
configuration mode
(used under configure
terminal node)
This accesses
fw-template node
(used in fw
configuration mode).
This executes session
(used in fw-template
configuration mode).
Function
This enters FW
configuration mode
(used in configure
terminal mode)