Command Show Dpi-Vlan-Binding; Command Show Dpi-Mng-Ip - Zte ZXR10 8900 Series Command Manual

Example
Command
Function
Command Mode
Command Format
Example
Command
Function
Command Mode
Command Format
Example
To show all connections under source ip 11.0.0.2, execute the fol-
lowing command:
ZXR10(config-dpi)#show connection-by-ip 11.0.0.2 SRC-IP
SPORT DST-IP
-----------------------------------------------------------------
11.0.0.2 1024
Command show
dpi-vlan-binding
This shows dpi-template binding of all vlans on DPI card.
All modes
show dpi-vlan-binding
To show dpi-template binding of all vlans on DPI card, execute the
following command:
ZXR10(config-dpi)# show dpi-vlan-binding Interface
Template-id Dpi-slot
------------------------------------------------------
vlan3 1
1 3
3 1
1 1 vlan13
vlan14 1
1 3
Command show
dpi-mng-ip
This shows management ip and ftp server ip configured on DPI
card.
All modes
show dpi-mng-ip
To show management ip and ftp server ip configured on DPI card,
execute the following command:
ZXR10(config-dpi)#show dpi-mng-ip Dpi-slot
Server-ip Used
------------------------------------------------
5 20.0.0.22
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 8 New Commands in DPI Config Mode
DPORT PROTOC DIRECT
12.0.0.2 1025 17
Service-id Used
3 1
1 1 vlan11
1 vlan12 1
1 3
3 1
1 1
11.1.1.10
SER-ID SUBSER-ID
up 1 0
1 vlan4
1
3
1 1
1 vlan19
Mng-ip
1
35