ZXR10 8900 Series Command Manual (FW Volume)
Command Format
Command
Function
Command Format
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
116
Confidential and Proprietary Information of ZTE CORPORATION
traffic statistic
traffic clear
This command is used to clear traffics on all interfaces.
traffic clear
vlan show
This command is used to view vlan configuration information.
vlan show [id <number1>]|[total]|[num <number2> from
<number3>]
Parameter
<number1>
total
<number2>
<number3>
This command is used to view vlan configuration information.
To show all VLAN virtual interfaces, execute the following com-
mand:
# vlan show
webui_ip show
This command is used to show WEBUI management ip of this FW
service card.
webui_ip show
Description
This is one number.
This shows the total number of VLANs.
This is one number, in range of 1-100.
This is one number, in range of 1-4094.