Edit Alarm Event Setup Screen; Figure 131 Alarm Event Setup Edit; Table 86 Alarm Event Setup Edit - ZyXEL Communications IES-612-51A User Manual

Table 85 Alarm Event Setup (continued)
LABEL
SNMP
Syslog
Severity
Clearable

40.4.1 Edit Alarm Event Setup Screen

Use this screen to specify the severity level of an alarm(s) and where the system is to send the
alarm(s).
To open this screen, click Alarm, Alarm Status. Then, click an alarm's index number.

Figure 131 Alarm Event Setup Edit

The following table describes the labels in this screen.

Table 86 Alarm Event Setup Edit

LABEL
Alarm
Condition Code
Condition
Facility
SNMP
Syslog
Severity
Clearable
IES-612-51A User's Guide
DESCRIPTION
This field displays "V" if the system is to send this alarm to an SNMP server. It
displays "-" if the system does not send this alarm to an SNMP server.
This field displays "V" if the system is to send this alarm to a syslog server. It
displays "-" if the system does not send this alarm to a syslog server.
This field displays the alarm severity level (critical, major, minor or info).
This displays "V" if the alarm clear command removes the alarm from the
system. It displays "-"if the alarm clear command does not remove the alarm
from the system.
DESCRIPTION
This field displays the alarm category to which the alarm belongs.
eqpt represents equipment alarms.
dsl represents Digital Subscriber Line (DSL) alarms.
enet represents Ethernet alarms.
sys represents system alarms.
This field displays the condition code number for the specific alarm message.
This field displays a text description for the condition under which the alarm
applies.
The log facility (local1~local7) has the device log the syslog messages to a
particular file in the syslog server. Select a log facility (local1~local7) from the
drop-down list box if this entry is for sending alarms to a syslog server. See your
syslog program's documentation for details.
Select this check box to have the system send this alarm to an SNMP server.
Select this check box to have the system send this alarm to a syslog server.
Select an alarm severity level (critical, major, minor or info) for this alarm.
Critical alarms are the most severe, major alarms are the second most severe,
minor alarms are the third most severe and info alarms are the least severe.
Select this check box to allow administrators to use the management interface
to remove an alarm report generated by this alarm event entry.
Select this check box to keep an alarm report generated by this alarm event in
the system until the conditions that caused the alarm report are no longer
present.
Chapter 40 Alarm
253