ZyXEL Communications IES-612-51A User Manual page 268

Chapter 41 Commands Summary
Table 88 Commands (continued)
CLASS COMMAND
igmpsnoop mvlan
set
igmpsnoop mvlan
show
igmpsnoop mvlan
disable
igmpsnoop mvlan
enable
igmpsnoop mvlan
delete
igmpsnoop mvlan
group set
igmpsnoop mvlan
group delete
igmpsnoop mvlan
group show
igmpfilter set
igmpfilter show
igmpfilter profile
set
igmpfilter profile
delete
igmpfilter profile
show
queuemap show
queuemap set
garptimer show
garptimer join
garptimer leave
garptimer leaveall
rstp show
rstp enable
268
PARAMETERS DESCRIPTION
Configures a MVLAN entry.
<vid>
<portlist>:<F<T|U>
|X> [<portlist>:
<F<T|U>|X> ...]
[name]
Show multicast vlans,
<vlanlist>
Include group information
Turns off a MVLAN entry.
<vid>
Turns on a MVLAN entry.
<vid>
Removes a MVLAN entry.
<vlanlist>
Create a multicast to VLAN
<vid> <index>
translation entry.
<start_mcast_ip>
up to 16 entries
<end_mcast_ip>
<index>: 1~16,
Note: IP address in each entry
should be disjointed
Delete a multicast to VLAN
<vid> <index>
translation entry.
Show a multicast to VLAN
<vlanlist>
translation entry.
Sets an ADSL port(s) to use an
<portlist> <name>
IGMP filter profile.
Displays which IGMP filter profile
[portlist]
an ADSL port(s) is using.
Configures an IGMP filter profile.
<name> <index>
<startip> <endip>
Removes an IGMP filter profile.
<name>
Displays an IGMP filter profile's
[name]
settings.
Displays the system's priority level
to ENET queue mapping.
Maps a priority level to a ENET
<priority> <queue>
queue.
Display the system's garp
settings.
Set system's garp join time.
<join msec>
Set system's garp leave time.
<leave msec>
Set system's garp leaveall time.
<leaveall msec>
Display the system's rstp settings. M/L
Turn system's rstp on.
P
H/H
M/L
H/H
H/H
H/H
H/H
H/H
M/L
H/H
M/L
H/H
H/H
M/L
M/L
H/H
M/L
H/H
H/H
H/H
H/H
IES-612-51A User's Guide