6.4.1 The AP Lists Edit Screen
Use this screen to change the description or radio profile of an AP managed by the
NWA. Click Edit in the CONTROLLER > AP Lists screen. The following screen
displays.
Figure 64 The Controller > AP Configuration Screen
The following table describes the labels in this screen.
Figure 65 The Controller > AP Configuration Screen
LABEL
Model
MAC Address
Description
WLAN1 Radio Profile
Apply
Reset
NWA-3160 Series User's Guide
DESCRIPTION
This is the model number of the managed AP.
This is the MAC address of the managed AP.
Enter a short description of this access point (up to 32 English
keyboard characters).
Select the radio profile you want to use for this AP. Configure
radio profiles in the Profile Edit > Radio screen.
Select Disable if you do not want to use a radio profile. The AP's
radio is not active when you select Disable.
Click this to save the changes in this screen.
Click this to return the fields in this screen to their previously-
saved values.
Chapter 6 AP Controller Mode
93