Annex M Enable Command; Annex M Disable Command; Annex I Enable Command; Figure 236 Annex L Disable Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 52 ADSL Commands

Figure 236 Annex L Disable Command Example

ras> adsl annexl disable 5

52.1.20 Annex M Enable Command

This command turns on the Annex M double upstream feature on the specified ADSL2/2+
port(s). This has the upstream connection use tones 6 to 63.
Syntax:
ras> adsl annexm enable <portlist>
The following example turns on the Annex M feature for port 5.

Figure 237 Annex M Enable Command Example

ras> adsl annexm enable 5

52.1.21 Annex M Disable Command

This command turns off the Annex M double upstream feature on the specified ADSL2/2+
port(s).
Syntax:
ras> adsl annexm disable <portlist>
The following example turns off the Annex M feature for port 5.

Figure 238 Annex M Disable Command Example

ras> adsl annexm disable 5

52.1.22 Annex I Enable Command

This command turns on the Annex I all digital mode feature on the specified ADSL2/2+
port(s). With Annex I, the DSL connection uses the full spectrum of the physical line and the
user can not use POTS or ISDN service.
Syntax:
ras> adsl annexi enable <portlist>
The following example turns on the Annex I feature for port 5.
356
IES-612-51A User's Guide