Static Multicast; Chapter 18 Static Multicast; Static Multicast Screen; Figure 76 Static Multicast - ZyXEL Communications IES-612-51A User Manual

C
H A P T E R
This chapter describes the Static Multicast screen.

18.1 Static Multicast

Use static multicast to allow incoming frames based on multicast MAC address(es) that you
specify. This feature can be used in conjunction with IGMP snooping/proxy to allow multicast
MAC address(es) that are not learned by IGMP snooping or IGMP proxy. Use static multicast
to pass routing protocols, such as RIP and OSPF.

18.2 Static Multicast Screen

To open this screen, click Advanced Application, Static Multicast.

Figure 76 Static Multicast

The following table describes the labels in this screen.

Table 42 Static Multicast

LABEL
The Number of

Static Multicast

Page X of X
Previous
Next
Reload
Index
IES-612-51A User's Guide
Static Multicast
DESCRIPTION
This is the number of static multicast entries configured on the IES-612-51A.
This identifies which page of information is displayed and the total number of
pages of information.
Click one of these buttons to show the previous/next screen if all status
information cannot be seen in one screen.
Click this button to refresh the screen.
The first table displays the names of the fields. The subsequent tables show the
settings of the IGMP groups.
This is the static multicast group index number.
18
163