C
H A P T E R
Virtual Channel Management
This chapter shows you how to use commands to configure virtual channels.
53.1 Virtual Channel Management Overview
See
Chapter 13 on page 107
53.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
53.2.1 Show Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile show [vcprofile]
where
[vcprofile]
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
53.2.2 Set Virtual Channel Profile Command
Syntax:
ras> adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
IES-612-51A User's Guide
for background information on virtual channels and ATM QoS.
The name of the virtual channel profile (up to 31 ASCII characters).
=
53
Commands
375