ZyXEL Communications IES-612-51A User Manual page 275

Table 88 Commands (continued)
CLASS COMMAND
adsl lineperf
adsl linerate
adsl 15mperf
adsl 1dayperf
igmpsnoop info
igmpsnoop group
igmpsnoop port
info
igmpsnoop port
group
dhcp counter
dhcp snoop
rmon
rstp
vlan
mac
port
dot1x
enet
ip
config
show
save
restore
exit
IES-612-51A User's Guide
PARAMETERS DESCRIPTION
Displays the performance
<portlist>
statistics of the specified ADSL
port.
Displays the line rate.
<portlist>
Displays line performance
<portlist> [count
statistics for the current and
<0..96>]
previous 15-minute periods.
Displays line performance
<portlist>
statistics for the current and
previous 24 hours.
Display protocol packets counters
[clear]
& number of learned groups
Display IGMP learned group
member information
Display received protocol packets
counters, number of joined
groups.
Display joined groups in this port
<portlist>
Display DHCP statistics for a port
[<portlist>
[clear]]
Display snooping
<portlist>
Display uplink/subtending link
stats|history
RMON information
enet1|enet2
Displays RSTP information
Displays current VLANs.
[vlanlist]
Displays current MAC address
forwarding table.
This command displays and/or
<portlist> [<vpi>
erases port statistics.
<vci>] [clear]
Shows the dot1x status of the
[portlist]
specified port.
Displays Ethernet port settings
and statistics.
Displays a Management port's
status and performance data.
Displays the device's
<sys|sw|adsl|ip|st
configuration.
at|all> [nopause]
Saves the current configuration.
Reloads the factory default
configuration.
Ends the console or telnet
session.
Chapter 41 Commands Summary
P
M/L
M/L
M/L
M/L
L/L
L/L
L/L
M/L
L/L
L/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/~
M/L
H/H
H/H
L/L
275