ZyXEL Communications IES-612-51A User Manual page 259

Table 88 Commands (continued)
CLASS COMMAND
snmp getcommunity
snmp setcommunity
snmp trapcommunity
snmp trusthost
snmp trapdst set
snmp trapdst del
server show
server enable
server disable
server port
client show
client enable
client disable
client set
syslog show
syslog enable
syslog disable
syslog server
x stdio show
stdio set
time show
time set
date show
date set
timeserver show
timeserver set
IES-612-51A User's Guide
PARAMETERS DESCRIPTION
Sets the SNMP GetRequest
<community>
community.
Sets the SNMP SetRequest
<community>
community.
Sets the SNMP Trap community.
<community>
Sets the SNMP trusted host. Set
<ip>
0.0.0.0 to trust all hosts.
Sets the SNMP trap server and
<index> <ip>
listening port. Set 0.0.0.0 to not
[<port>]
send any SNMP traps.
Deletes the SNMP trap server
<index>
Displays the device's service
status and port numbers.
Turns on a service.
<telnet|ftp|web|ic
mp>
Turns off a service.
<telnet|ftp|web|ic
mp>
Sets a port for a service.
<telnet|ftp|web>
<port>
Displays the device's secured
client settings.
Turns on a secure client.
<index>
Turns off a secure client.
<index>
Sets a secured client set: a range
<index> <start ip>
of IP addresses from which you
<end ip> [[telnet]
can manage the device and the
[ftp] [web]
protocols that can be used.
[icmp]]
Displays the syslog settings.
Turns on the syslog logging.
Turns off the syslog logging.
Sets the IP address of the syslog
<ip>
server.
Displays Current Stdio Timeout.
Sets Current Stdio Timeout.
<minute|0:no
timeout>
Displays the system's current
time.
Sets the system's time.
<hh> [<mm> [ss]]
Displays the system's current
date.
Sets the system's date.
<yyyy mm dd>
Displays the system's time server. M/L
Sets the system to not use a time
<none>
server.
Chapter 41 Commands Summary
P
H/H
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
L/L
H/H
L/L
H/H
L/L
H/H
H/H
259