Figure 66 Vlan Port Setting; Table 34 Vlan Port Setting - ZyXEL Communications IES-612-51A User Manual

Chapter 16 VLAN

Figure 66 VLAN Port Setting

The following table describes the labels in this screen.

Table 34 VLAN Port Setting

LABEL
VLAN Status
Static VLAN
Port
PVID
Priority
GVRP
Acceptable Frame
Type
Apply
150
DESCRIPTION
Click VLAN Status to see which of the IES-612-51A's ports are members of
which VLANs (see Section 16.3 on page
Click Static VLAN to configure ports to dynamically join a VLAN group or
permanently assign ports to a VLAN group or prohibit ports from joining a VLAN
group (see Section 16.4 on page
The port numbers identify the IES-612-51A's ports.
Type the Port VLAN ID (PVID) from 1 to 4094. The IES-612-51A assigns the
PVID to untagged frames or priority frames (0 VID) received on this port.
Select an IEEE 802.1p priority to assign to untagged frames or priority frames (0
VID) received on this port.
Select this check box if the IES-612-51A should use GVRP to automatically
register and configure VLAN membership.
Select All to have the port accept both tagged and untagged incoming frames.
Select Tag Only to have the port only accept incoming frames that have a
VLAN tag.
Click Apply to save your changes to the IES-612-51A's volatile memory. The
IES-612-51A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
146).
148).
IES-612-51A User's Guide
A