Snmp Commands; Chapter 51 Snmp Commands; Get Community Command; Set Community Command - ZyXEL Communications IES-612-51A User Manual

C
H A P T E R
This chapter covers Simple Network Management Protocol (SNMP) with the IES-612-51A.

51.1 SNMP Commands

Use these commands to configure SNMP settings. See
information about SNMP.

51.1.1 Get Community Command

Syntax:
ras> sys snmp getcommunity <community>
where
<community>
Enter this command with the community to set the password.

51.1.2 Set Community Command

Syntax:
ras> sys snmp setcommunity <community>
where
<community>
Enter this command with the community to set the password.

51.1.3 Trusted Host Set Command

Syntax:
ras> sys snmp trusthost <ip>
IES-612-51A User's Guide

SNMP Commands

Chapter 34 on page 225
The password for the incoming
=
requests from the management station.
The password for the incoming
=
management station.
51
for more
- and -
Get GetNext
- requests from the
Set
341