Igmp Snoop Statistics Commands; Igmp Snoop Info Statistics Command; Igmp Group Statistics Command; Figure 183 Igmp Count Show Command Example - ZyXEL Communications IES-612-51A User Manual

where
[portlist]
This command displays the IGMP count limit setting status for the specified DSL port(s). The
following example displays the IGMP count limit settings for ports 1-5.

Figure 183 IGMP Count Show Command Example

ras> switch igmpsnoop igmpcount show 1~5
port enable count
---- ------ -----
1 -
2 -
3 -
4 -
5 -

47.7 IGMP Snoop Statistics Commands

Use the IGMP Snoop Statistics commands to display current IGMP settings and statistics.

47.7.1 IGMP Snoop Info Statistics Command

Syntax:
ras> statistics igmpsnoop info [clear]
This command displays the current IGMP settings and the number of IGMP-related packets
received. The following figure shows an example.

Figure 184 IGMP Snoop Info Statistics Command Example

ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query
number of report
number of leave
number of groups

47.7.2 IGMP Group Statistics Command

Syntax:
ras> statistics igmpsnoop group [<vid> [<mcast_ip>]]
IES-612-51A User's Guide
You can specify a single DSL port <1>, all DSL ports <*> or
=
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
5
5
5
5
5
= 0
= 0
= 0
= 0
Chapter 47 IGMP Commands
321