43.8 Alarm History Show Command
Syntax:
ras> alarm history show [<severity>|all] [<alarm>|all] [<condition>|all]
[<sdate>|all] [<edate>|all] [for|rev] [detail]]
where
<sdate>
<edate>
[for|rev]
[detail]
This command displays historic alarms by severity, alarm category, alarm condition and/or
dates.
The following example displays the historic critical level alarms for all alarm categories, and
all conditions.
Figure 142 Alarm History Show Command Example
ras> alarm history show major all all all all rev detail
no alarm
------ ------
1 enet
2 enet
43.9 Alarm History Clear Command
Syntax:
ras> alarm history clear [<alarm>|all <condition>|all] <severity>
This command removes historic alarm entries by alarm category, alarm condition or severity.
The following example removes the historic minor level alarms for all alarm categories, and
all conditions.
Figure 143 Alarm History Clear Command Example
ras> alarm history clear minor
IES-612-51A User's Guide
The start date, in
=
=
The end date, in
The displaying order. Use
=
order starting from the oldest alarm. Use
reverse chronological order starting from the most recent
alarm.
Display in-depth alarm information.
=
condition
-------------------- -------- -------------- -------
-down
* NTENET1:GbE interface is down
+down
* NTENET1:GbE interface is down
Chapter 43 Alarm Commands
format.
yyyy/mm/dd
format.
yyyy/mm/dd
to display in chronological
for
severity timestamp
major
01/01 00:00:12 enet 1
major
01/01 00:00:10 enet 1
to display in
rev
source
287