Table 4 Web Configurator Screens (continued)
LABEL
Alarm Status
Alarm Event Setup
Alarm Port Setup
Management
Maintenance
Diagnostic
MAC Table
ARP Table
Config Save
Config Save
4.5 Changing Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Basic Setting and then User Account to display the User Account screen.
Figure 17 User Account
Click the index number 1 to edit the default administrator account settings.
IES-612-51A User's Guide
DESCRIPTION
Use these screens to view the alarms that are currently in the system.
Use these screens to view and set the severity levels of the alarms and where
the system is to send them.
Use this screen to set the alarm severity threshold for recording alarms on an
individual port(s).
Use this screen to perform firmware and configuration file maintenance as well
as restart the system.
Use this screen to view system logs and test port(s).
Use this screen to view the MAC addresses of devices attached to what ports.
Use this screen to view the MAC address to IP address resolution table.
Use this screen to save the device's configuration into the nonvolatile memory
(the IES-612-51A's storage that remains even if the IES-612-51A's power is
turned off).
Chapter 4 Introducing the Web Configurator
65