where
<portlist>
<vpi>
<vci>
<profile>
This command allows you to remove an ACL profile from the specified PVC.
54.2.3 ACL Assignment Show Command
Syntax:
ras> switch acl show [<portlist>] [<vpi> <vci>]
where
<portlist>
<vpi>
<vci>
This command displays the current ACL profiles applied to the specified PVC(s). The
following figure shows an example.
Figure 293 ACL Assignment Show Command Example
ras> switch acl show
port vpi
---- --- ----- ---- --------------------------------
1
0
IES-612-51A User's Guide
The port number of the PVC. You can specify a single DSL
=
port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
=
The VPI of the PVC.
The VCI of the PVC.
=
The name of the ACL profile.
=
=
The port number of the PVC. You can specify a single DSL
port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
The VPI of the PVC.
=
The VCI of the PVC.
=
vci type profile
33 PVC
test
Chapter 54 ACL Commands
403