Saving Your Configuration; Logging Out Of The Web Configurator; Figure 18 User Account - ZyXEL Communications IES-612-51A User Manual

Chapter 4 Introducing the Web Configurator

Figure 18 User Account

Enter the new password in the Password and Retype Password to confirm fields, and click
Modify. Do not forget to click Config Save before you exit the web configurator. See
4.6 on page

4.6 Saving Your Configuration

Click Apply in a configuration screen when you are done modifying the settings in that screen
to save your changes back to the run-time memory. Settings in the run-time memory are lost
when the IES-612-51A's power is turned off.
Click Config Save in the navigation panel to save your configuration to nonvolatile memory.
Nonvolatile memory refers to the IES-612-51A's storage that remains even if the IES-612-
51A's power is turned off.
Use Config Save when you are done with a configuration session.

4.7 Logging Out of the Web Configurator

Click Logout in any screen to exit the web configurator. You have to log in with your
password again after you log out. This is recommended after you finish a management session
both for security reasons and so you do not lock out other device administrators.
66
66.
Section
IES-612-51A User's Guide