Dsl Port Downstream Carrier1 Command; Figure 227 Dsl Port Downstream Carrier0 Command Example 1; Figure 228 Dsl Port Downstream Carrier0 Command Display Example; Figure 229 Dsl Port Downstream Carrier0 Command Example 2 - ZyXEL Communications IES-612-51A User Manual

Chapter 52 ADSL Commands
This command displays or sets masks for downstream carrier tones from 33 to 255. Masking a
carrier tone disables the use of that tone on the specified DSL port. The most significant bit
defines the lowest tone number in a mask.
The following example disables downstream carrier tone 71 for DSL port 5.

Figure 227 DSL Port Downstream Carrier0 Command Example 1

ras> adsl dscarrier0 5 0 01000000 0 0 0 0 0
The following example displays the results.

Figure 228 DSL Port Downstream Carrier0 Command Display Example

ras> adsl dscarrier0 5
port
---- |--------|--------|--------|--------|--------|--------|--------|
5
Tone:
m1:32-63, m2:64-95, m3:96-127, m4:128-159
m5:160-191, m6:192-223, m7:224-255
This example disables downstream carrier tones 70 and 71 for DSL port 5.

Figure 229 DSL Port Downstream Carrier0 Command Example 2

ras> adsl dscarrier0 5 0 03000000 0 0 0 0 0

52.1.15 DSL Port Downstream Carrier1 Command

Syntax:
ras> adsl dscarrier1 <port number> [<m0> <m1> <m2> <m3> <m4> <m5> <m6> <m7>]
where
<m0> - <m7>
<m0>
<m1>
<m2>
<m3>
<m4>
<m5>
<m6>
<m7>
The hexadecimal digit is converted to binary and a '1' masks (disables) the corresponding tone.
Disabling a carrier tone turns it off so the system does not send data on it.
352
m1 m2
00000000 01000000 00000000 00000000 00000000 00000000 00000000
The downstream carrier tones to be masked (disabled). Each
=
<
<
represents 4 tones).
tones 256~287
=
tones 288~319
=
tones 320~351
=
tones 352~383
=
tones 384~415
=
= tones 416~447
tones 448~479
=
tones 480~511
=
ds carrier
m3 m4 m5
> can use up to 8 hexadecimal digits (0~ffffffff). Each
mx
> represents 32 carrier tones (each hexadecimal digit
mx
m6 m7
IES-612-51A User's Guide