Spanning Tree Protocol Status Screen; Figure 83 Spanning Tree Protocol Status; Table 50 Spanning Tree Protocol Status - ZyXEL Communications IES-612-51A User Manual

22.2 Spanning Tree Protocol Status Screen

To open this screen, click Advanced Application, Spanning Tree Protocol.

Figure 83 Spanning Tree Protocol Status

The following table describes the labels in this screen.

Table 50 Spanning Tree Protocol Status

LABEL
STP Config
Spanning Tree
Protocol
Bridge Status
Our bridge ID
Designated root ID
Topology change
times
Time since change
Cost to root
IES-612-51A User's Guide
DESCRIPTION
Click STP Config to modify the IES-612-51A's STP settings (see
on page 178).
This field displays On if STP is activated. Otherwise, it displays Off.
If STP is activated, the following fields appear. If STP is not activated, Disabled
appears.
This is the unique identifier for this bridge, consisting of bridge priority plus MAC
address. This ID is the same in Designated root ID if the IES-612-51A is the
root switch.
This is the unique identifier for the root bridge, consisting of bridge priority plus
MAC address. This ID is the same in Our bridge ID if the IES-612-51A is the
root switch.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
This is the path cost from the root port on this switch to the root switch.
Chapter 22 Spanning Tree Protocol
Section 22.3
177