Table 24 Ppvc Setup, Edit - ZyXEL Communications IES-612-51A User Manual

The following table describes the labels in this screen.

Table 24 PPVC Setup, Edit

LABEL
Port
Index
VPI/VCI
VC Profile
Level
Delete
Add
VPI
VCI
DS VC Profile
US VC Profile
Level
Add / Modify
Close
IES-612-51A User's Guide
DESCRIPTION
This is the port for which you are viewing or configuring settings.
This field displays the number of the member PVC.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port. The subscriber's device
must create this PVC.
This shows which VC profile this channel uses for downstream traffic shaping.
The VC profile for upstream policing also displays if the channel is configured to
use one.
This field displays the number of the member PVC's priority queue.
Click Delete to remove a member PVC from the PPVC.
Clicking Delete saves your changes to the IES-612-51A's volatile memory.
The IES-612-51A loses these changes if it is turned off or loses power, so use
the Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Use this section of the screen to add or modify a member PVC.
Type the Virtual Path Identifier for this member PVC.
Type the Virtual Circuit Identifier for this member PPVC. This PVC cannot
overlap with any existing PVC's on this port.
Use the drop-down list box to select a VC profile to use for this channel's
downstream traffic shaping.
Use the drop-down list box to select a VC profile to use for this channel's
upstream traffic. The IES-612-51A does not perform upstream traffic policing if
you do not specify an upstream VC profile.
Use the drop-down list box to select the priority queue (0 to 7) to add to use for
the PVC. 7 is the highest level.
Click Add / Modify to save member PVC settings for a PPVC.
In order to change a member PVC 's settings, just enter the PVC's VPI and VCI,
and configure the settings you want. These settings replace the PVC's old
settings when you click Add / Modify.
Clicking Add / Modify saves your changes to the IES-612-51A's volatile
memory.
The IES-612-51A loses these changes if it is turned off or loses power, so use
the Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Close to exit the screen without saving your changes.
Chapter 13 xDSL Port Setup
123