Dhcp Snoop Flush Command; Dhcp Snoop Show Command; Dhcp Counter Statistics Command; Figure 147 Dhcp Snoop Show Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 44 DHCP Commands
This command disables the DHCP snooping feature on the specified port(s).

44.4.3 DHCP Snoop Flush Command

Syntax:
ras> switch dhcpsnoop flush <portlist>
where
<portlist>
This command clears the DHCP snooping binding table on the specified port(s). The system
also automatically clears the binding table when you disable DHCP snooping.

44.4.4 DHCP Snoop Show Command

Syntax:
ras> switch dhcpsnoop show <portlist>
where
<portlist>
Use this command to display the current DHCP snooping settings of the specified port(s). The
following example displays the settings of ports 1-5.

Figure 147 DHCP Snoop Show Command Example

ras> switch dhcpsnoop show 1~5
port enable
----- --------
1 V
2 -
3 -
4 -
5 -

44.4.5 DHCP Counter Statistics Command

Syntax:
ras> statistics dhcp counter [<portlist> [clear]]
296
You can specify a single port <1>, all ports <*> or a list of
=
ports <1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
You can specify a single port <1>, all ports <*> or a list of
=
ports <1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
IES-612-51A User's Guide