ZyXEL Communications IES-612-51A User Manual page 271

Table 88 Commands (continued)
CLASS COMMAND
acl set
acl show
dhcpsnoop disable
dhcpsnoop enable
dhcpsnoop flush
dhcpsnoop show
dscp show
dscp enable
dscp disable
dscp map show
dscp map set
vlan show
vlan portshow
vlan set
vlan enable
vlan disable
vlan delete
vlan pvid
vlan priority
vlan gvrp
IES-612-51A User's Guide
PARAMETERS DESCRIPTION
Apply an acl profile to a PVC
<portlist> <vpi>
<vci> <profile> Max. 8 profiles per port
Show acl profile setting for a PVC
[portlist] [<vpi>
<vci>]
Disable ip spoofing for a port
< portlist >
Enable ip spoofing for a port
< portlist >
Flush DHCP snooping table for a
< portlist >
port
Display DHCP snooping result on
<portlist>
a port
Displaying per port DSCP setting
[portlist]
Enable ADSL/ENET ports to use
<portlist>
DSCP mapping
Disable ADSL/ENET ports to use
< portlist >
DSCP mapping
Displaying the DSCP code to
[portlist]
802.1p mapping table
Setting the DSCP code to 802.1p
<srccp> <mappri>
mapping table
<srccp>: source
code point, 0~63,
example:
1,3~5,10~15
<mappri> :
mapping priority,
0~7
Displays VLAN settings.
<vlanlist>
Displays the port(s) VLAN
[portlist]
settings.
Configures a VLAN entry.
<vid>
<portlist>:<F<T|U>
|X|N> [<portlist>:
<F<T|U>|X|N> ...]
[name]
Turns on a VLAN entry.
<vid>
Turns off a VLAN entry.
<vid>
Removes a VLAN entry.
<vlanlist>
Sets the PVID (Port VLAN ID)
<portlist> <pvid>
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
Sets a port's default IEEE 802.1p
<portlist>
priority.
<priority>
Set the port(s) to enable or
<portlist>
disable gvrp.
<enable|disable>
Chapter 41 Commands Summary
P
M/H
L/L
M/H
M/H
M/H
L/L
L/L
M/H
M/H
L/L
M/H
M/L
M/L
H/H
H/H
H/H
H/H
H/H
H/H
H/H
271