Figure 32 Port Statistics (Ethernet); Table 6 Port Statistics (Ethernet) - ZyXEL Communications IES-612-51A User Manual

Figure 32 Port Statistics (Ethernet)

The following table describes the labels in this screen.

Table 6 Port Statistics (Ethernet)

LABEL
RMON
Return
Port
Port Name
Rx bytes
Rx packets
Rx error fcs
Rx multicast
Rx broadcast
IES-612-51A User's Guide
DESCRIPTION
Click this to open the RMON Statistics screen.
Click this to go back to the Home screen.
Use this drop-down list box to select a port for which you wish to view statistics.
This field identifies the port described in this screen.
This field displays the name that you have configured for the port.
This field shows the number of octets of Ethernet frames received that are from
0 to 1518 octets in size, counting the ones in bad packets, not counting framing
bits but counting FCS (Frame Check Sequence) octets. An octet is an 8-bit
binary digit (byte).
This field shows the number of packets received on this port (including
multicast, unicast, broadcast and bad packets).
This field shows the number of frames received with an integral length of 64 to
1518 octets and containing a Frame Check Sequence error.
This field shows the number of good multicast frames received of 64 to 1518
octets in length (for non VLAN) or 1522 octets (for VLAN), not including
Broadcast frames. Frames with range or length errors are also not taken into
account.
This field shows the number of good broadcast frames received of 64 to 1518
octets in length (for non VLAN) or 1522 octets (for VLAN), not including
multicast frames. Frames with range or length errors are also not taken into
account.
Chapter 6 Home and Port Statistics Screens
77