Acl Assignment Commands; Acl Assignment Set Command; Acl Assignment Delete Command; Figure 291 Acl Profile Show Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 54 ACL Commands

Figure 291 ACL Profile Show Command Example

ras> switch acl profile show test
profile test:
rule:
vlan
priority:2
action:
rpri
rate

54.2 ACL Assignment Commands

Use these commands to apply ACL profiles to PVCs.

54.2.1 ACL Assignment Set Command

Syntax:
ras> switch acl set <portlist> <vpi> <vci> <profile>
where
<portlist>
<vpi>
<vci>
<profile>
This command allows you to apply an ACL profile to the specified port(s). You can apply up
to eight profiles to a subscriber port.
The following example applies the ACL profile "test" to a PVC.

Figure 292 ACL Assignment Set Command Example

ras> switch acl set 1 0 33 test

54.2.2 ACL Assignment Delete Command

Syntax:
ras> switch acl delete <portlist> <vpi> <vci> <profile>
402
:10
:7
:1000
The port number of the PVC. You can specify a single DSL
=
port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
The VPI of the PVC.
=
= The VCI of the PVC.
The name of the ACL profile.
=
IES-612-51A User's Guide