Route Delete Command; Route Show Command; Figure 196 Route Show Command Example - ZyXEL Communications IES-612-51A User Manual

where
<dst ip>
[/netmask]
<gateway ip>
[metric]
<name>
default
This command defines a new, static IP forwarding route or edits an existing one.

49.3.4 Route Delete Command

Syntax:
ras> ip route delete <dst ip>[/netmask]
where
<dst ip>
[/netmask]
This command removes a static, IP forwarding route.

49.3.5 Route Show Command

Syntax:
ras> ip route show
This command displays the IES-612-51A's routing table.
An example is shown next.

Figure 196 Route Show Command Example

ras> ip route show
index dest
----- --------------- --------------- ------ ------------------------------
-
1 192.168.1.0/24
2 default
IES-612-51A User's Guide
The destination IP address of packets that this static route is
=
to route.
The destination subnet mask of packets that this static route
=
is to route.
The IP address of the gateway that you want to send the
=
packets through.
= The metric (hop count) of this static route.
A name to identify this static route. Up to 31 ASCII
=
characters. Spaces and tabs are not allowed.
= Use this to configure the IES-612-51A's default route.
The destination IP address of packets to which this static
=
route applies.
The destination subnet mask of packets to which this static
=
route applies.
gateway metric name
192.168.1.1
192.168.1.254
Chapter 49 IP Commands
1
1
333