Acl Profile Map Screen - ZyXEL Communications IES-612-51A User Manual

Table 69 ACL Profile Setup (continued)
LABEL
Profile Name
Rule
ethernet type
vlan
source mac
dest mac
priority
protocol
protocol type
source ip
dest ip
tos
source port
dest port
Action
rate
replaced vlan
replaced priority
deny
ACL Profile List
Index
ACL Profile
Select
Delete
Select All
Select None

31.4 ACL Profile Map Screen

Use this screen to look at all the ACL profiles and the PVCs to which each one is assigned. To
open this screen, click Advanced Application, ACL, ACL Profile Map.
IES-612-51A User's Guide
DESCRIPTION
Enter a descriptive name for the ACL profile. The name can be 1-31 printable
ASCII characters long. Spaces are not allowed.
Select which type of rule to use.
Note: The lower the number (1-14), the higher the priority the rule
has.
Provide additional information required for the selected rule. Additional rules
consist of one or more of the following criteria.
Enter the 16-bit EtherType value between 0 and 65535.
Enter a VLAN ID between 1 and 4094.
Enter the source MAC address.
Enter the destination MAC address.
Select the IEEE 802.1p priority.
Select the IP protocol used.
Enter the IP protocol number (between 0 and 255) used.
Enter the source IP address and subnet mask in dotted decimal notation.
Enter the source IP address and subnet mask in dotted decimal notation.
Enter the start and end Type of Service between 0 and 255.
Enter the source port or range of source ports.
Enter the destination port or range of destination ports.
Select which action(s) the IES-612-51A should follow when the criteria are
satisfied.
Enter the maximum bandwidth this traffic is allowed to have.
Enter the VLAN ID that this traffic should use.
Select the IEEE 802.1p priority that this traffic should have.
Select this if you want the IES-612-51A to reject this kind of traffic.
This field displays a sequential value. The sequence in this table is not
important. Click this to edit the associated ACL profile in the section above.
This field displays the name of this ACL profile.
Select the check box in the Select column for an entry, and click Delete to
remove the entry.
Click this to select all entries in the table.
Click this to un-select all entries in the table.
Chapter 31 ACL
219