Linedata Command; Figure 242 Linedata Command Example - ZyXEL Communications IES-612-51A User Manual

Chapter 52 ADSL Commands

52.2.2 Linedata Command

Syntax:
ras> statistics adsl linedata <portlist>
where
<portlist>
This command shows the line bit allocation of a DSL port.
Discrete Multi-Tone (DMT) modulation divides up a line's bandwidth into tones. This
command displays the number of bits transmitted for each tone. This can be used to determine
the quality of the connection, whether a given sub-carrier loop has sufficient margins to
support DSL transmission rates, and possibly to determine whether certain specific types of
interference or line attenuation exist. See the ITU-T G.992.1 recommendation for more
information on DMT.
The better (or shorter) the line, the higher the number of bits transmitted for a DMT tone. The
maximum number of bits that can be transmitted per DMT tone is 15.
"upstream carrier load" displays the number of bits transmitted per DMT tone for the upstream
channel (from the subscriber's DSL modem or router to the IES-612-51A).
"downstream carrier load" displays the number of bits received per DMT tone for the
downstream channel (from the IES-612-51A to the subscriber's DSL modem or router).
The bit allocation contents are only valid when the link is up.
In the following example, the upstream channel is carried on tones 7 to 39 and the downstream
channel is carried on tones 53 to 259 (space is left between the channels to avoid interference).

Figure 242 Linedata Command Example

ras> statistics adsl linedata 1
[port 1]
up stream carrier load: number of bits per symbol(tone):
tone
tone
down stream carrier load: number of bits per symbol(tone):
tone
tone 20-
tone 40-
tone 60-
tone 80-
tone 100- 119: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 120- 139: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 140- 159: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 160- 179: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 180- 199: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 200- 219: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 220- 239: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 240- 259: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02
358
You can specify a single DSL port <1>, all DSL ports <*> or
=
a list of DSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
0- 19: 00 00 00 00 00 00 02 03 04 05 - 06 07 07 07 07 07 07 07 08 08
20- 39: 08 08 07 08 08 07 07 06 06 05 - 04 03
0- 19: 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00
39: 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00
59: 00 00 00 00 00 00 00 00 00 00 - 00 00 00 01 01 01 01 01 01 02
79: 02 02 02 02 00 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
99: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
IES-612-51A User's Guide