Screen; Figure 87 802.1X; Table 53 802.1X - ZyXEL Communications IES-612-51A User Manual

Table 52 RADIUS (continued)
LABEL
Retype Password to
confirm
Add
Cancel
Index
Name
Delete
Cancel
23.3 802.1x Screen
To open this screen, click Advanced Application, Port Authentication, 802.1x.

Figure 87 802.1x

The following table describes the labels in this screen.

Table 53 802.1x

LABEL
RADIUS/Local
Profile
Enable
Apply
IES-612-51A User's Guide
DESCRIPTION
Type the password again to make sure you have entered it properly.
Click Add to save your changes to the IES-612-51A's volatile memory. The IES-
612-51A loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
This table displays the configured user profiles.
These are the numbers of the user profiles. Click this number to edit the user
profile.
This is the user name of the user profile.
Select a user profile's Delete check box and click Delete to remove the user
profile.
Click Cancel to begin configuring this screen afresh and clear any selected
Delete check boxes.
DESCRIPTION
Click this link to configure the RADIUS server or local profile settings (see
Section 23.2 on page 182).
Select this check box to turn on IEEE 802.1x authentication on the switch.
Click Apply to save your changes to the IES-612-51A's volatile memory. The
IES-612-51A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Chapter 23 Port Authentication
183