Rmon Statistics Screen - ZyXEL Communications IES-612-51A User Manual

Table 7 Port Statistics (DSL) (continued)
LABEL
Rx discard packets
Errors
Tx rate
Rx rate
Tx bytes
Rx bytes
VPI/VCI
Tx Packets
Rx Packets
Tx rate
Rx rate
Tx cells
Rx cells
Errors
Poll Interval(s)
Set Interval
Stop
Port
Clear Counter
Reset

6.1.3 RMON Statistics Screen

Use this screen to display RMON statistics about a port. To open this screen, click RMON in
the DSL Port Statistics screen or Ethernet Port Statistics screen.
IES-612-51A User's Guide
DESCRIPTION
This field shows the number of received packets that were dropped on this port.
Some of the possible reasons for the discarding of received (rx) packets are:
• The packet filter is enabled and the packets matched a packet filter.
• The MAC filter is enabled and the IES-612-51A dropped the packets
according to the MAC filter's configuration.
• The packets contained frames with an invalid VLAN ID.
This field shows the number of AAL5 frames received with CRC errors.
This field shows the number of kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the number of bytes that have been transmitted on this port.
This field shows the number of bytes that have been received on this port.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI) of channels on this port.
This field shows the number of packets transmitted on each channel.
This field shows the number of packets received on each channel.
This field shows the number of bytes per second transmitted on each channel.
This field shows the number of bytes per second received on each channel.
This field shows the number of ATM cells transmitted on each channel.
This field shows the number of ATM cells received on each channel.
This field shows the number of error packets on each channel.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to halt system statistic polling.
Select a port from the Port drop-down list box and then click Clear Counter to
erase the recorded statistical information for that port.
Click this to set the Poll Interval(s) and Port fields to their default values and to
refresh the screen.
Chapter 6 Home and Port Statistics Screens
81